Sharp MX-M2651 Troubleshooting Manual Download Page 9

Page: 9 / 67

General Problems

A COVER OR INSERT IS NOT

PRINTED ON THE SPECIFIED

PAPER

Has the paper type been set correctly?

THE CONNECTED USB DEVICE

CANNOT BE USED

Is the USB device compatible with the machine?

Is the connected USB device recognized correctly?

Is the USB memory formatted as FAT32 or NTFS?

Are you using a USB memory device with a capacity of more than 32 GB?

THE FINISHER/SADDLE FINISHER

DOES NOT OPERATE

Does a message appear indicating that you need to remove paper from

the stapler compiler?

Have functions been disabled by the administrator?

STAPLING DOES NOT TAKE PLACE

(INCLUDING SADDLE STITCH)

Does a message appear instructing you to check the staple unit?

Does a message appear instructing you to add staples?

Is a different width of paper mixed in?

Are there more sheets than can be stapled at once?

Is a paper size that cannot be stapled included in the print job?

Is the paper type setting of the tray selected in the printer driver set to a

paper type that cannot be stapled?

PUNCHING DOES NOT TAKE

PLACE

Does a message appear instructing you to check the punch module?

Is a different size of paper mixed in?

Is a paper size that cannot be punched included in the print job?

Is the tray selected in the printer driver set to a paper type that cannot

be punched?

THE STAPLING POSITION OR

PUNCH POSITION IS NOT

CORRECT

Is the stapling position setting correctly?

Are the punching positions setting correctly?

FOLDING DOES NOT TAKE PLACE

Did the administrator enable the [Disabling of Duplex] setting?

Are you using a paper type that has a specific front and reverse side?

THE FOLD POSITION IS NOT

CORRECT

Is the original placed face up or face down correctly?

PREVIEW IMAGES OR THUMBNAIL

IMAGES DO NOT APPEAR

Are there a number of jobs waiting to be executed?

THE TOUCH PANEL DISPLAY IS

DIFFICULT TO VIEW

Is the brightness properly adjusted?

YOU WERE LOGGED OUT

WITHOUT LOGGING OUT

YOURSELF

Did Auto Clear activate?

I DON'T KNOW WHERE THE IP

ADDRESS SETTING IS

The IP address is set in the Network Settings of Setting mode.

I DON'T KNOW HOW TO CHANGE

THE BACKGROUND COLOR OF

THE HOME SCREEN

You can change the background color in "MFP Display Pattern Setting".

I DON'T KNOW HOW TO ADD A

SHORTCUT TO OR DELETE A

SHORTCUT FROM THE HOME

SCREEN

You can change a shortcut in "Edit Home".

I DON'T KNOW HOW TO RESTORE

THE LARGE TEXT SETTING TO ITS

ORGINAL STATE

Is large text mode enabled in the home screen?

I DON'T KNOW HOW TO ADJUST

THE TIME THE MACHINE ENTERS

ENERGY SAVE MODE

Set the time the machine enters energy save mode in the Energy Save

settings of setting mode.

I FORGOT THE ADMINISTRATOR

PASSWORD

Was the administrator password changed from the factory default

setting?

I DON'T KNOW WHOM TO

CONTACT FOR MAINTENANCE

AND SERVICE

Please check the customer support information.

Problem

Check

Page

Summary of Contents for MX-M2651




































































Search results

Summary of Contents for MX-M2651

Reviews:

Related manuals for MX-M2651

Brands by name

Popular brands

Sharp MX-M2651, Troubleshooting Manual

Search results

Summary of Contents for MX-M2651

Reviews:

Related manuals for MX-M2651

Brands by name

Popular brands