MX-FX11 FAX SOFTWARE SWITCH 2 – 24
129
1
Scanner
Setting of the mail
content in E-Mail
sending (Footer)
Setting to determine whether the mail footer registered from the web is added
to the content or not in sending the Scan to E-Mail.
"0": The footer is not added.
"1": The footer is added.
E-mail setting
2
Scanner
Setting of transmitted
data upper limit value
(FTP/desktop/shared
folder)
When transmitting to FTP, desktop or a shared folder, this setting determines
whether or not to stop transmission of data as over the upper limit if the image
data size of 1 job is found to be in excess of the value set for the "transmitted
data upper limit (FTP/desktop/shared folder)."
"0": OFF
"1": ON
Scanner setting
3, 4
Scanner
Transmitted data upper
limit (FTP/desktop/
shared folder)
This sets the upper limit for image data size in 1 job in cases where the
transmitted data upper limit (FTP/desktop/shared folder) is set at "ON."
"00": 50Mbyte
"01": 150Mbyte
"10": 300Mbyte
The initial value is reverted to if a value outside of the setting range is set.
Scanner setting
5
Function
Received data Network
forwarding
Setting to determine whether to make the "Received data Network forwarding"
function that can be registered from the Web valid or invalid.
"0": Invalid
"1": Valid
*3
(WEB) Management
setting
6
Function
Prohibition of
forwarded table
registration
Setting to determine whether to make the "Prohibition of forwarded table
registration" function that can be registered from the Web valid or invalid.
"0": Permitted
"1": Prohibited
*3
(WEB) Management
setting
7
Function
Prohibition of
forwarded table
correction
Setting to determine whether to make the "Prohibition of forwarded table
correction" function that can be registered from the Web valid or invalid.
"0": Permitted
"1": Prohibited
*3
(WEB) Management
setting
8
Function
Prohibition of
forwarding permission
revision
Setting to determine whether to make the "Prohibition of forwarding permission
revision" function that can be registered from the Web valid or invalid.
"0": Permitted
"1": Prohibited
*3
(WEB) Management
setting
130
1-3
Not used
4, 5
Function
Print conditions of
received data in user
transfer
(Option adding and
extension)
Setting of the method for the user to acquire reception data in the "reception
data print setting" of Inbound Routing registered from the Web.
(SIM130-1 option expansion version)
"00": When an error occurs.
"01": Always print
"10": When an error occurs, no print is made and data are sent to the E-mail
address.
When it is set to the outside of the specified range, the default is valid.
*3
6-8
Not used
131
1
FAX paper exit tray
setting
Setting of the paper exit tray for FAX data output
(When the finisher is not installed.)
"0": Center tray
"1": Right tray
(When the finisher is installed)
"0": Finisher tray
"1": Right tray
FAX reception
setting
2
Not used
3, 4
FAX paper exit tray
setting
(Setting of Upper/
Middle/Lower when the
finisher is installed.)
Setting of the upper/middle/lower tray to which the FAX/I-FAX reception data
are outputted when the finisher/saddle finisher is installed.
"00": Upper tray
"01": Middle tray
"10": Lower tray
When it is set to the outside of the specified range, the default is valid.
FAX reception
setting
5-8
Not used
132
-
150
1-8
Not used
SW
No.
Bit
No.
Item
SW selection and function
System settings
