MX-FX11 FAX SOFTWARE SWITCH 2 – 22
118
1-4
Transmission
Interval between re-
calls when busy
Set the interval until the next re-call when the line is busy during transmission.
This can be set from 1 to 15 (Taiwan/Indonesia: 4 to 15) minutes in 1-minute
increments by binary inputting.
Re-call interval: Set value x 1 minute
The initial value is reverted to if a value outside of the setting range is set.
FAX transmission
setting
5-8
Transmission
Number of re-calls at
times of
communication error
Set the number of re-calls to be made when a communication error occurs
during transmission.
This can be set from 1 (Taiwan: 1 to 15, U.K./France/Germany/Sweden/
Indonesia/Middle East/Russia/South Africa: 1 to 5, China: 1 to 3, Malaysia/
India: 1 to 9) times by binary inputting.
Number of recalls: Setting x once
The initial value is reverted to if a value outside of the setting range is set.
FAX transmission
setting
119
1-4
Transmission
Re-call interval at
times of
communication error
Set the interval until the next re-call when communication error occurs.
This can be set from 1 to 15 (Indonesia: 4 to 15) minutes in 1-minute
increments by binary inputting.
Number of recalls: Setting x once
The initial value is reverted to if a value outside of the setting range is set.
FAX transmission
setting/
Adjustment value
5
Transmission
Re-call permitted at
times of
communication error
Set whether or not to re-call when a communication error occurs during
transmission.
"0": Prohibited
"1": Permitted
FAX transmission
setting
6, 7
Reception
Reception mode
setting
Setting to determine whether to put the reception mode into automatic or
manual.
(Do not set manual reception when the handset or external telephone are not
connected. However, setting is possible and reception can be performed by
means of the on-hook key).
In the manual reception mode, when the nighttime FAX mode is ON, the
machine is activated but no calls arrive.
Even if the external telephone setting is not made, answerphone connection
can be set from the soft SW.
"00": Automatic reception
"01": Manual reception
"10": Answerphone connection
The initial value is reverted to if a value outside of the setting range is set.
Setting can be made even without the external telephone and handset.
Reception/
forwarding setting
8
Not used
120
1, 2
Reception
Specified number
reception Enable/
Disable setting (FAX)
Setting to determine Enable/Disable of the specified number reception (FAX).
However, only valid during automatic reception.
"00": All Disable
"01": Reception Enable
"10": Reception Disable
"11": All Disable
However, implement using a separate SW (Setting to refuse reception at times
of manual reception (FAX)) when receiving manually.
FAX reception
setting
3
Function
Automatic reduced
printing to fixed sizes
If a size in excess of the valid printing area is received, this setting determines
whether or not to automatically reduce size. If size is not reduced, the
excessive area is discarded without being printed.
"0": Reduce
"1": Do not reduce (discard)
The reduction factor is set using the separate SW (Magnification setting in
automatic reduction).
FAX reception
setting
4
Function
Setting to reduce and
discard when printing
A3-11 x 17 (reduced
printing setting when
receiving A3)
Setting to determine whether to reduce to 11 x 17 inch size sheet or to print
without reducing in cases of receiving A3 wide document when 11 x 17 inch
size sheet is set.
"0": Reduce
"1": Do not reduce (discard)
When not reducing, the area that cannot be printed is scrapped.
When set to "Reduce," the overall data are reduced to 94%.
FAX reception
setting
5
Function
Reduced print setting
when receiving letters.
Setting to determine whether to reduce to A4 size sheet or to print without
reducing in cases of receiving 8.5 x 11 (LTR) when A4 size sheet is set.
"0": Reduce
"1": Do not reduce (discard)
When not reducing, the area that cannot be printed is scrapped.
When set to "Reduce," the overall data are reduced to 94%.
FAX reception
setting
6
Double-faced printing
of received data
(double-faced
reception setting)
Setting to determine whether received data are printed on both sides.
"0": Double-faced printing prohibited
"1": Double-faced printing permitted
FAX reception
setting
7, 8
Setting of received
data print conditions
Setting for selecting the optimum sheet when printing data received by FAX.
"00": Equal magnification/Reduction permitted
"01": Equal magnification (division/reduction prohibited)
"10": Equal magnification/Division permitted
The initial value is reverted to if a value outside of the setting range is set.
Setting for selecting the optimum sheet when printing data received.
FAX reception
setting
SW
No.
Bit
No.
Item
SW selection and function
System settings
