16
System settings
■
Clearance Time Settings
To further strengthen the security settings, you can have data clearing repeated a set
number of times in each area.
Touch the select box
of each item and select the number of times that you wish data
clearing to be repeated. When finished, touch the [OK] key.
●
Number of Times Data Clear is Repeated
The number of times data clearing is repeated when "Clear All Memory", "Clear
Document Filing Data", "Clear All Data in Jobs Completed List", or "Clear Address
Book and Registered Data" is executed can be set to any number from 1 to 7. The
factory setting is 1.
●
Number of Times Power Up Auto Clear Program is Repeated
The number of times "Power Up Auto Clear" is repeated can be set to any number
from 1 to 7. The factory setting is 1.
●
Number of Times Auto Clear at Job End Program is Repeated
The number of times auto clear is repeated after each job is completed can be set to
any number from 1 to 7. The factory setting is 1.
This setting is only enabled when the [Power Up Auto Clear] checkbox is
selected.
About the repeat setting
When the repeat setting (number of repetitions) is increased to enhance the security
function, the time required for data clearing increases.
It is recommended that you select repeat settings for "Number of Times Data Clear is
Repeated", "Number of Times Power Up Auto Clear Program is Repeated", and
"Number of Times Auto Clear at Job End Program is Repeated" that are suitable for
your security needs and conditions of use.
OK
Cancel
System Settings
Clearance Time Settings
Number of Times Data Clear is Repeated:
Number of Times Auto Clear at Job End Program
is Repeated:
Time(s)
1
1
1
Time(s)
Time(s)
Number of Times Power Up Auto Clear Program is
Repeated:
Summary of Contents for MX-FR46U
Page 30: ...EX1 ...
