MX-FNX9 DISASSEMBLY AND ASSEMBLY 6 – 2
(5) Reverse guide unit
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the inner cover. Refer to A-(2).
3)
Remove the reverse guide unit.
B. Transport section, paper exit section
(1) Paddle
1)
Open the front cover, and slide the inner finisher.
2)
Remove the paddle holders, and remove the paddles.
(2) Flapper solenoid
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Disconnect the connector, and remove the flapper solenoid.
* When installing, shift and fix the solenoid so that the reverse
flapper and the cushion material are in contact with each
other with the solenoid plunger pushed in.
(3) Inlet port sensor
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the sensor holder, and remove the inlet port sensor.
2
1
