Sharp  MX-C312, Operation Manual

Page: 170 / 793

2-11
COPIER
Contents
3
Specify the original size.
(1) Touch the appropriate original size key.
(2) Touch the [OK] key.
When placing an AB (inch) size or non-standard size original, specify the original size as explained in " ORIGINAL
SIZES " (page 2-29).
4
Check the paper to be used and the
colour mode.
Make sure that the desired paper (tray) and colour mode are
selected.
• To change the paper (tray), touch the [Paper Select] key.
☞
PAPER TRAYS (page 2-9)
• To change the colour mode, touch the [Colour Mode] key.
☞
COLOUR COPY MODES (page 2-21)
For some original size settings, the same size of paper as the original may not be automatically selected. In this case,
manually change the paper size.
5
Set the number of copies (number of
sets) with the numeric keys.
• Up to 999 copies (sets) can be set.
• A single copy can be made even if "0" appears for the number of copies.
If an incorrect number of copies is set...
Press the [CLEAR] key ( ) and then enter the correct number.
6
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Even if a colour mode is selected, copying will take place in black and white if the [BLACK & WHITE START] key is
pressed.
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
None
Original
OK
A5
B5
Size Input
216x343 A4
216x330 16K
216x340
Custom Size
Inch
AB
(2) (1)
A4
A4
A5
Auto
A4
Plain
A4
A4
A4
Colour Mode
Special Modes
Plain
2-Sided Copy
Output
File
Quick File
Copy Ratio
100%
3.
2.
1.
Original Paper Select
Full Colour
Exposure
Auto
4.
Plain
7
A4
Special Modes
2-Sided Copy