Sharp MX-C301, Quick Start Manual, Page: 5 / 20

5
Supplies
Standard supplies for this product that can replaced by the user
include paper and toner cartridges.
Be sure to use only SHARP-specified products for the toner
cartridges and transparency film.
GENUINE SUPPLIES
For best copying results, be sure to use only
Sharp Genuine Supplies which are designed,
engineered, and tested to maximize the life
and performance of Sharp products. Look
for the Genuine Supplies label on the toner
package.
Storage of supplies
Proper storage
1. Store the supplies in a location that is:
• clean and dry,
• at a stable temperature,
• not exposed to direct sunlight.
2. Store paper in the wrapper and lying flat.
3. Paper stored in packages standing up or out of the wrapper may curl or
become damp, resulting in paper misfeeds.
Storing toner cartridges
Store a new toner cartridge box horizontally with the top side up. Do not store
a toner cartridge standing on end. If stored standing on end, the toner may not
distribute well even after shaking the cartridge vigorously, and will remain inside
the cartridge without flowing out.
• Store the toner in a location that is cooler than 104°F (40°C). Storage in a hot
location may cause the toner in the cartridge to solidify.
• Please use SHARP-recommended toner cartridges. If toner cartridges other than
SHARP-recommended toner cartridges are used, the machine may not attain full
quality and performance and there is a risk of damage to the machine.
Supply of spare parts and consumables
The supply of spare parts for repair of the machine is guaranteed for at least 7 years
following the termination of production. Spare parts are those parts of the machine
which may break down within the scope of the ordinary use of the product, whereas
those parts which normally exceed the life of the product are not to be considered as
spare parts. Consumables too, are available for 7 years following the termination of
production.
Noise emission
Noise emission values
The following shows noise emission values as measured according
to ISO7779.
Sound power level L
WA d
Operating (continuous printing) 7.1 B
Standby mode (Low power level mode) -
Sound pressure level L
pAm
Operating (continuous printing) Bystander positions 55 dB
Standby mode Bystander positions 24 dB
• Operating: with option MX-CS11.
• Standby: "-"=less than background noise.
Before using the machine
Quick Start Guide: this manual
This section explains precautions to ensure safe usage, part names and how
to switch on/off the power. This section also includes important information for
persons that are responsible for the maintenance of this machine.
Read this section before using the machine for the first time.
Printing and faxing from a computer
Software Setup Guide (PDF)
This section explains how to install the various drivers needed when using this
machine as a printer, network scanner, or fax machine.
The Software Setup Guide is on the “Software CD-ROM”.
Directions for use
Operation Guide (PDF)
The [Operation Guide] can be downloaded from the machine and viewed on a
computer. You can download the [Operation Guide] following the procedures below
while the machine is connected to the network.
How to read the Operation Guide
The Operation Guide on the accessory CD-ROM provides detailed instructions for
operating the machine. The Operation Guide is provided in PDF format.
1 Confirm the machine’s IP address
First, touch the [SYSTEM SETTINGS] key ( ) on the operation panel and
then touch [List Print (User)] when it appears on the touch panel.
Next, select [NIC Page] from [Printer Test Page] and then touch the [Print]
button. Confirm the machine’s IP address from the printed list.
2 Insert the machine’s IP address into the address bar of your
web browser to access the
machine
http://machine’s IP address/
In the factory default state, user
password entry is required. And user
verification may be required depending on the machine’s settings.
Please check with the machine’s administrator to obtain the account
information necessary for verification.
3 Download the [Operation Guide]
Click [Operation Manual Download] from the page displayed. Next, select a
language to download the file in from the [Language] list and then click on
the [Download] button.
4 Double-click on the downloaded file to display the Operation Guide
To view the manual in PDF format, Acrobat Reader or Adobe Reader of Adobe
Systems Incorporated is required. If neither program is installed on your
computer, the programs can be downloaded from the following URL:
http://
www.adobe.com/
Operation manuals
The instructions for this manual are separated in the following three sections.