Sharp MD-ZV30, Operation Manual

Page: 7 / 46

<P=005>
(Continued)
■
Proper use of the remote control
Notes concerning use:
●
Replace the batteries if control distance decreases or oper-
ation becomes erratic.
●
Periodically clean the transmitter window on the remote con-
trol and the sensor on the main unit with a soft cloth.
●
Exposing the sensor on the main unit to strong light may
interfere with operation. Change the lighting or the direction
of the unit.
●
Keep the remote control away from moisture, excessive heat,
shock, and vibrations.
CD
MD
POWER
VOLUME
CD MD DIGITAL EDIT
NAME /
TOC EDIT TIMER /
DELETE DISPLAY
ENTER
TRACK START
TUNING
CURSOR REC
DISC-1
DISC-2
DISC-3 CD PLAY
1
2
3
TUNER
(BAND)
MODE ON/OFF
SURROUND 3D
15
15
PREPARATION FOR USE
●
Unplug the AC power lead from the AC socket before
connecting or disconnecting any component.
■
Aerial connection
Connect the AM loop aerial wire to the AM ANTENNA socket.
Position the AM loop aerial for optimum reception.
Place the AM loop aerial on a shelf, etc., or attach it to a stand
or wall with screws (not supplied).
Notes:
●
Do not place the aerial on the unit. It may result in noise
generation, since the unit is equipped with digital electronics.
Place the aerial away from the unit for better reception.
●
If the AM loop aerial is placed near the AC power lead, it
may cause interference.
Unplugging the connector:
Hold the connector and remove it in the direction indicated by
the arrow. Do not pull on the lead.
■
Connecting the AC power lead
●
After connecting the aerial, connect the AC power lead to the
AC power input socket, then connect the AC power lead plug
to an AC socket.
●
Unplug the AC power lead from the AC socket if the unit is
not to be used for a prolonged period of time.
●
Never use any power lead other than the one supplied. Other-
wise, a malfunction or an accident may occur.
●
Before unplugging the AC power lead, set the ON/STAND-BY
switch to STAND-BY. If the AC power lead is unplugged whilst
the power is on, the information for track numbers may not
be written properly during recording or editing.
0.2 m - 6 m
(8" - 20’)
3 2 1
AM loop aerial
2
1
2
1
●
For European custo-
mers
AC 230 V, 50 Hz
To an AC socket
To AC INPUT
●
For U.K. customers
AC 230 V, 50 Hz
To an AC socket
To AC INPUT
MD-ZV30H TINSZ0217AWZZ
E-5