background image

– 2 –

MD-MT88H/99H

Precaution to be taken when replacing and servicing the laser pickup.
The following precautions must be observed during servicing to protect your eyes against exposure to the laser.

Warning of possible eye damage when repairing:
If the AC adaptor or batteries are connected when the top housing (disc cover) of the unit is removed, and the PLAY key is
pressed, the laser will light up during focus access (2-3 seconds). (Fig. 2-1) During the operation, the laser will leak from the
opening between the magnetic head and the mechanical chassis (Fig. 2-2). In order to protect your eyes, you must not look
at the laser during repair. Before repairing be sure to disconnect the AC adaptor and remove the batteries.

Precaution to be taken when replacing and servicing the
Laser Pickup.

THE AEL (ACCESSIBLE EMISSION LEVEL) OF THE LASER
POWER OUTPUT IS LESS THAN CLASS 1 BUT THE LASER
COMPONENT IS CAPABLE OF EMITTING RADIATION
EXCEEDING THE LIMIT FOR CLASS 1. THEREFORE IT IS
IMPORTANT THAT THE FOLLOWING PRECAUTIONS ARE
OBSERVED DURING SERVICING TO PROTECT YOUR
EYES AGAINST EXPOSURE TO THE LASER BEAM.

(1) When the cabinet has been removed, the power is

turned on without a compact disc, and the Pickup is on
a position outer than the lead-in position, the Laser will
light for several seconds to detect a disc. Do not look
into the Pickup Lens.

(2) The Laser Power Output of the Pickup inside the unit

and replacement service parts have already been
adjusted prior to shipping.

(3) No adjustment to the Laser Power should be attempted

when replacing or servicing the Pickup.

(4) Under no circumstances look directly into the Pickup

Lens at any time.

(5) CAUTION - Use of controls or adjustments, or

performance  of procedures other than those specified
herein may result in hazardous radiation exposure.

SAFETY PRECAUTION FOR SERVICE MANUAL

Laser Diode Properties

Material: GaAlAs

Wavelength: 785 nm

Pulse time:

Read mode: 0.8 mW Continuous
Write mode:

max 10 mW 0.5S
min cycle 1.5S
Repetition

Magnet head

Optical pickup

Top Cabinet

,,,

Laser Beam

Optical Pick-Up

Main PWB

Spindle motor

Mechanism

Chassis

Magnet Head

Figure 2-1

Figure 2-2

English:
This product is classified as a CLASS 1 LASER PRODUCT.
German:
Dieses Produkt ist ein Laserprodukt der Klasse 1.
French:
Ce Produit est Classifié comme étant un PRODUCTO
LASER DE CLASSE 1.

VARO !

Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle. Älä katso säteeseen.

VARNING!

Osynlig laserstralning när denna del är öppnad och spärren är urkopplad. Betrakta ej strälen.

Summary of Contents for MD-MT88H





















































Reviews: