Sharp MD-MT45H, Operation Manual

Page: 138 / 140

ENGLISH
00/12/27 E_45SEEG_6.fm
E-43
Ref
e
rences
-S
pec
ifications-
Specifications
„
General
Power source:
Battery life:
z
The continuous recording time is for analogue inputs
when the volume level is set to "VOL 0".
z
The continuous play time shows the value when the
volume level is set to "VOL 15".
z
The above values are the standard values when the
unit is charged and used at an ambient temperature of
25°C (77°F).
z
The operating time when using an alkaline battery
may be different, depending on the type and manufac-
turer of the battery, and on the operating temperature.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification chang-
es for product improvement without prior notice. The performance specification figures indicated are nominal values
of production units. There may be some deviations from these values in individual units.
DC 1.5V: Commercially available, "AA" size
(LR6), alkaline battery x 1
DC 1.2V: Optional rechargeable Nickel-Metal
Hydride battery (AD-N70BT) x 1
DC 5V: Optional AC adaptor (AD-T20APH)
(AC 220-230V, 50/60 Hz)
DC 4.5V: Optional car adaptor, AD-CA20X (for
cars with a 12-24V DC negative earth
electrical system)
Power con-
sumption: 7 W
(Optional AC adaptor (AD-T20APH))
Output pow-
er: RMS; 20 mW (10 mW + 10 mW)
(0.2% T.H.D.)
Charging
time: Approx. 3.5 hours (90 %)
Approx. 5.5 hours (fully charged)
(When using the optional AC adaptor
(AD-T20APH))
When using a commercial-
ly available, high capacity,
"AA" size (LR6), alkaline
battery When using the optional
rechargeable battery (fully
charged)
Continuous recording:
Approx. 3 hours
Continuous recording:
Approx. 7 hours
Continuous play:
Approx. 12 hours
Continuous play:
Approx. 12 hours