Sharp MD-MT45H, Operation Manual

Page: 119 / 140

ENGLISH
00/12/27 E_45SEEG_4.fm
E-24
U
seful Feat
ure
s
-Chec
k
ing Displa
ys-
„
To display the playing time of an individual
track
„
Checking the remaining amount of battery
level
The remaining amount of battery level is shown by the
battery indicator (
) during operation.
z
When the battery is completely discharged, the bat-
tery indicator will flash. Recharge the battery or
replace the alkaline battery with a new one.
z
When the battery has run completely out, "BATT
EMPTY" will appear. Then, the power will be discon-
nected automatically.
Notes:
z
If you use the battery which you stopped charging
halfway, "
" may appear. It does not mean that the
battery is completely charged.
z
The battery indicator will not correctly display the
remaining capacity for approximately 10 seconds after
the power has been turned on.
z
When the AC adaptor or a separately available car
adaptor is used, the battery indicator will not be
shown.
z
The number of bars shown in the battery indicator may
increase or decrease, depending on the operation
being performed. This is normal.
1
Whilst in the stop mode, press the or but-
ton to display the track number and track name.
2
Press the DISP button to display the playing
time for that track.
Each time the or button is pressed, the playing
time of the previous or next track will be displayed.