62
MD-DS55
(J)
TINSJA030AWZZ
MD-DS55
ENGLISH OPERATION MANUAL
4. Press the
MODE
button to select the item you
want to change.
“LIGHTnor”
Display on the remote control
Indicated.
Backlight on the remote control
Lit for approx. 10 seconds
when operated.
Operation indicator
Flashing.
“LIGHTall”
Display on the remote control
Indicated.
Backlight on the remote control
Lit.
Operation indicator
Flashing.
“LIGHToff”
Display on the remote control
Indicated for approx.
10 seconds when operated.
Backlight on the remote control
Lit for approx. 10 seconds
when operated.
Operation indicator
Goes out.(*)
(*)
●
The indicator blinks for several seconds when
an MD is inserted.
●
While charging, the operation indicator remains lit
in “LIGHTnor.”, “LIGHTall” and “LIGHToff” modes.
5. When the setup is completed, press the button.
Beep sound
Auto play
Auto power save
Display on the remote control
Backlight on the remote control
Operation indicator
OFF
BEEP off
PL off
PS off
ON
BEEP on
autoPLAY
autoPS
See table below
CHANGE THE INITIAL SETUP (pages 36 - 37)
1. Insert a MiniDisc.
2. Hold down the
MODE
button on the remote control
for 2 seconds or more while in the stop mode.
After “SET UP” is displayed, “BEEP on” or
“BEEP off” will be displayed.
3. Slide the button to
or
to select a menu
you want to change.
BEEP on
autoPLAY
autoPS
LIGHTnor
USING WITH THE ALKALINE BATTERY
(page 35)
1. Open the battery case supplied with the unit.
2. Insert the AA size battery [LR6] into the battery
case by matching it + and – terminals to the
diagram in the battery case, and then close the
battery case.
3. Align the protuberances on the battery case with
the indentations on the side of the unit.
4. Turn the fixing screw on the battery case toward
the word “LOCK”, and then make sure that the
battery case does not move.
●
When using this portable MD with an alkaline
battery, keep the rechargeable battery in the
main unit.
●
Do not insert a rechargeable battery (such as
nickel-cadmium rechargeable battery) into the
battery case.
