Sharp LL-T17D3, Operation Manual

Page: 23 / 133

23
English
Deutsc
h
Fran
ç
ais
Italiano
Espa
ñ
ol
English
Specifications
Product specifications
Model name
LL-T17D3-H (Frosty gray) / LL-T17D3-B (Black)
LCD display
43 cm measured diagonally TFT LCD module
Resolution (max.)
SXGA 1280 x 1024 pixels
Displayable colors (max.)
Approx.16.19 million colors (6bit + FRC)
Brightness (max.)
250cd/m 2
Dot pitch
0.264(H) x 0.264(V) mm
Contrast ratio
500:1
Angle of visibility
Left-right 160°; Up-down 135° (contrast ratio
>
=
5)
Screen display size
Horizontal 337.9 mm x Vertical 270.3 mm
Video signal
Analog: Analog RGB (0.7Vp-p) [75 Ω ]
Digital: DVI standard based on 1.0
Sync signal
Separate Sync (TTL level: +/-), Sync on
Green, Composite Sync (TTL level: +/-)
Expansion compensation
Digital scaling (Enlarges VGA/SVGA/XGA etc. to
full screen size.)
Plug & Play
VESA DDC1/DDC2B compatible
Power management
VESA: based on DPMS
DVI:
based on DMPM
Speaker output
1W + 1W
Input signal terminal
Analog: 15 pin mini D-sub (3 rows)
Digital / Analog: 29 pin DVI-I
Audio input terminal
Mini stereo jack
Headphone terminal
Mini stereo jack
Screen tilt
Upward approx.0 - 20°; downward approx.0 - 5°
Screen swivel
Approx.90° from left through right (Turn table type)
Power supply
AC100 - 240V, 50/60Hz (Use special AC adapter,
type NL-A64J of Sharp Corporation.)
Temperature of operating environment
5 - 35°C
Power consumption
40W (With no audio input)
(47W maximum, 3W when in power-saving mode)
(Use special AC adapter.)
Dimensions
Approx. 398(W) x 188(D) x 376(H) mm
Weight
Approx. 6.5kg
(Excluding AC adapter and signal cable.)
Dimensions
(Units: mm)
61.5
188
398
344 376
239
- Special AC adapter:
Approx. 1.5 m
Approx. H 147 mm x D 59 mm x H 32 mm
- Analog signal cable: Approx. 1.8m
- Audio cable : Approx. 1.8m
- Digital signal cable, NL-C01E (purchased
separately): Approx. 2.0m
- Analog signal cable, NL-C02E (purchased
separately): Approx. 2.0m