Sharp LL-T17A4-B, Service Manual

Page: 10 / 31

LL-T17A4-H/B DISASSEMBLY AND ASSEMBLY
3 – 1
CHAPTER 3. DISASSEMBLY AND ASSEMBLY
1. STAND UNIT REMOVAL
1) Remove the rear cover (A) by sliding it upward.
2) Remove the screws, and remove the stand unit (B).
2. I/F PWB REMOVAL
1) Remove the screws, and remove the rear cabinet.
2) Remove the screws, and remove the shield by sliding it upward.
3) Remove all the connectors and flat cables on the PWB.
4) Remove the hex. screws, washer and screws, and remove the I/F
PWB by sliding it upward.
3. P/I PWB REMOVAL
1) Remove the connector covers (A), and remove all the connectors on
the PWB.
2) Remove the screws, and remove the P/I PWB (B).
4. LCD UNIT REMOVAL
1) Remove the screws, and remove the front cabinet (A).
2) Remove the screws, and remove the LCD unit (C) from the bracket
panel (B).
A
B
A
A
B
B
A
C