8
E
Turning Power ON/Off
Turning on the power
1. Press the POWER button.
Power LED
Press
POWER button
The power LED turns on.
2. Turn on the PC.
The screen appears.
Status
Status of the monitor
Green lit
Signal input
Orange lit
No signal input
Turning off the power
1. Turn off the PC.
2. Depress the POWER button for around 2 seconds.
Depress for around
2 seconds
POWER button
The power LED turns off.
Caution
• If the monitor will not be used for a long time, disconnect
the power plug from the power outlet.
Specifications
Model
LL-S201A
Power requirement
AC 100 V - 240 V, 50/60 Hz (when using the supplied AC adapter)
Operating temperature
32°F to 95°F (0°C to 35°C)
Operating humidity
20% to 80
% (no condensation)
Power consumption
35 W
Dimensions (excluding protrusions)
inch (mm)
Approx. 18-1/4
(W) x
1
(D) x 10-13/16 (H) (463.8
x 25.2 x 274.8
)
Weight
lbs. (kg)
Approx. 5.07
(2.3) (excluding the stand)
Approx. 6.39 (2.9) (including the stand)
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
n
Operation mode
When the monitor is turned on for the first time after being shipped from the factory, the operation mode setting screen will be
displayed. Set it to MODE1 or MODE2.
MODE1 ....If there is no operation for 4 hours or more, the monitor automatically enters standby mode. Power consumption in
standby mode is also minimized.
MODE2 ....
Will perform standard operation.
Even after being set, changes can be made using [Operation mode], located in the menu of the monitor. (See OPERATION
MANUAL.)
