E62
Power management
The monitor is based on the VESA DPMS and the
DVI DMPM standards. To activate the power
management function, the video card and the
computer used with it must also conform to these
standard.
DPMS: Display Power Management Signaling
DMPM: Digital Monitor Power Management
DDC (Plug & Play)
This monitor supports the VESA DDC (Display
Data Channel) standard.
DDC is a signal standard for carrying out Plug &
Play functions on the monitor or computer. It
transfers information such as degree of resolution
between the monitor and computer. You can use
this function if your computer is DDC compliant
and if it is set so that it can detect the Plug & Play
monitor.
There are many varieties of DDC due to the
differences between systems. This monitor works
with DDC2B.
Specifications
DPMS mode
Screen
Power
H-sync V-sync
consumption
ON
Display on
95 W
Yes
Yes
STANDBY
No
Yes
SUSPEND
Display off
5.5 W
Yes
No
OFF
No
No
DMPM mode
Screen
Power
consumption
ON
Display on
95 W
OFF
Display off
5.5 W
The analog RGB input connector pin
(Mini D-sub connector with 15 pins)
No.
Function
1
Red video signal input
2
Green video signal input
3
Blue video signal input
4
N.C.
5
GND
6
For red video signal GND
7
For green video signal GND
8
For blue video signal GND
9
+5V
10
GND
11
N.C.
12
DDC data
13
For Hsync signal input
14
For Vsync signal input
15
DDC clock
No.
Function
No.
Function
1
TMDS data 2–
13 N.C.
2
TMDS data 2+
14 +5V
3
TMDS data 2/4 shield 15 GND
4
N.C.
16 Hot plug detection
5
N.C.
17 TMDS data 0–
6
DDC clock
18 TMDS data 0+
7
DDC data
19 TMDS data 0/5 shield
8
N.C.
20 N.C.
9
TMDS data 1–
21 N.C.
10 TMDS data 1+
22 TMDS clock shield
11 TMDS data 1/3 shield 23 TMDS clock +
12 N.C.
24 TMDS clock –
The DVI-D input connector pin
(DVI-D connector with 24 pins)
LD-23SH1U_gb_02.P65
2005/01/20, 20:23
62
