Sharp LC52SB55U - LC - 52" LCD TV Service Manual Download Page 19 | Manualshive

Page: 19 / 112

background image

LC-52SB55U

5 – 1

LC-52SB55U

Service Manual

CHAPTER 5.

ADJUSTMENT

[1] ADJUSTMENT PROCEDURE

The adjustment values are set to the optimum conditions at the factory before shipping. If a value should become improper or an adjustment is
required due to part replacement, make an adjustment according to the following procedure.

1. After replacement of any PWB unit and/or IC for repair, please note the following.

•

When replacing the following units, make sure to prepare the new units loaded with updated software.

MAIN Unit: DUNTKE716FM01

2. Upgrading of each microprocessor software

CAUTION: Never “POWER OFF” the unit when software upgrade is ongoing.

Otherwise the system may be damaged beyond recovery.

2.1. Software version upgrade

The model employs the following software.

• Main software

• Monitor microprocessor software.

• LCD controller software

The main software, monitor microprocessor software, and LCD controller software can be upgraded by using a general-purpose USB Memory.

The followings are the procedures for upgrading, explained separately for the main software, monitor microprocessor software, and LCD controller
software.

2.2. Main software version upgrade

2.2.1 Get ready before you start

• USB Memory of 128MB or higher capacity.

• PC running on Windows 98/98SE/ME/2000/XP operating system.

• USB Memory reader/writer or PC with a USB port.

• The file system of a USB memory is FAT. (FAT32 is not applied)

• Use the USB memory without other functions. (lock and memory reader...etc)

2.2.2 Preparations

To upgrade the main software, it is necessary to get ready the USB Memory for version upgrade before you start.

Follow the steps below and create the USB Memory for version upgrade.

1. Copy the file LAKEFAxxx.USB (named temporarily) for version upgrade to the root directory (folder) of the USB Memory.

NOTE: In the USB Memory drive, do not store other folders or unrelated files, or more than one file for version upgrade.

Now the USB Memory for version upgrade is ready.

2.2.3 How to upgrade the software

1. Unplug the AC cord.

2. Insert the USB Memory for version upgrade (prepared as above) into the service socket located Right side of Main Board terminals, under INPUT3

terminal.

3. Plug in the AC cord with power button pressed down after 5 seconds, unpress the power button.

4. After the unit startup, the system upgrade screen as shown below appears within 20-40 seconds.

SB55

«
...
17
18
19
20
21
...
»

Summary of Contents for LC52SB55U - LC - 52" LCD TV

















































































































Reviews:

No comments

Related manuals for LC52SB55U - LC - 52" LCD TV

Brand: Panasonic Pages: 64

Viera TX-L32X3E

Brand: Panasonic Pages: 64

Brand: Panasonic Pages: 52

Brand: Amtran Pages: 31

Brand: Magnavox Pages: 27

Brand: Westinghouse Pages: 41

P-Series Quantum X

Brand: Vizio Pages: 48

Brand: TCL Pages: 63

Brand: Seiki Pages: 41

Brand: Vispera Pages: 43

Brand: Magnavox Pages: 2

Brand: Aiwa Pages: 36

Viera TC-50A410C

Brand: Panasonic Pages: 64

Brand: Panasonic Pages: 16

Brand: Samsung Pages: 76

The Frame LS03A

Brand: Samsung Pages: 44

Brand: XOCECO Pages: 38

Brand: Hitachi Pages: 27

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands