background image

View Mode

Side Bar

S. Stretch

Zoom

Stretch

34

Useful adjustment settings

Press 

VIEW MODE

 or 

a

/

b

 while the View 

Mode menu is still on the screen.

•  You can sequentially select a View Mode that has 

its own aspect ratio.

View Mode for 4:3 Programs

Stretch:

This mode is useful for 1.78:1 
DVDs.
When viewing 1.85:1 DVDs, stretch 
mode will still show very thin black 
bands at the top and bottom of the 
screen.

Press 

VIEW MODE

.

•  The View Mode menu displays.
•  The menu lists the View Mode options selectable 

for the type of video signal currently being 
received.

Side Bar:

Suitable for viewing conventional 
4:3 programs in their normal 
format.

S.Stretch (Smart stretch):

Suitable for stretching 4:3 
programs to fi ll the screen.

Zoom:

Suitable for viewing wide-screen 
2.35:1 anamorphic DVDs in full 
screen.

1

2

View Mode for HD Programs

Stretch mode is available for HD programs.
Suitable for viewing wide-screen 1.78:1 aspect-ratio 
programs. When viewing 1.85:1 programs, the stretch 
mode will still show very thin black bands at the top 
and bottom of the screen.

Summary of Contents for LC-C3242U




























































Reviews: