>>
<<
Enjoying 3D Image Viewing
(For the UQ17U, TQ15U, SQ17U, SQ15U and LE657U models)
ENG 5-8
Viewing 3D Images
NOTE
The TV screen may temporarily become black when the
TV is trying to detect a 3D image signal and when
switching from 3D to 2D mode.
Receiving a 3D Image Signal That Can Be Detected
Automatically
The image signal may contain a 3D identification signal. You
can enable the TV to automatically detect the 3D image type
by selecting "Setup" > "3D Setup" > "3D Auto Change" on
the TV.
(See page 5-11.)
1
When "3D Auto Change" is set to "Mode 1" or "Mode
2"
The 3D image type is detected automatically and the
appropriate 3D image is displayed.
When "3D Auto Change" is set to "Off"
The following message is displayed. Press
2D/3D
.
Press / to select the "Yes", and then press
ENTER
.
2
Turn on the 3D Glasses and place them on your head.
3
You can now view 3D images.
Switching from 3D to 2D Mode
4
Press
2D/3D
during the 3D mode.
Select "Yes" and press
ENTER
to switch to 2D mode.
Take off the 3D Glasses and turn off the power.
Ending 3D Image Viewing
5
Take off the 3D Glasses and turn off the power.
NOTE
If the input signal switches to 2D, 2D images are
displayed automatically.
3D mode is canceled automatically when the setting is
changed, input selection is changed, or the power is
turned off.