Sharp LC-60XF3DT, Service Manual

Page: 13 / 32

LC-60XF3DT
3 – 4
5. List of adjustment process mode menu
The character string in brackets [ ] will appear as a page title in the adjustment process menu header.
Page Line Item Description Remarks (adjustment detail, etc.)
1/21
1 MAIN Version 1xxx (xxxxx) Main software version
2 BOOT Version xxxxxxx BOOT Version.
3 Monitor Version xxxxxxx Monitor software version
4 T-CON Version/LED CON Version xxxxxxxx/xxxx T-CON/H.264 Version
5 NET TV KEY/MAC xxx/xxxx MAC Address.
7 CI+INFO/SECURE BOOT xxxxx/YES CI+ Key Information/SECURE BOOT
8 FRC-N Auto Script Version xxxxxxx
9 TCON Master/Slave Serial Version xxxxxxx
10 TOUCH SENSOR/IR Micon Version xxxxxxx/xxx
11 LAMP ERROR 0 Number of termination due to lamp error.
12 MONITOR ERR CAUSE 1) xxxxxx 2) xxxxxx
3) xxxxxx 4) xxxxxx Last error standby cause.
13 NORMAL STANDBY CAUSE 0 Situation that became standby at the end.
(Excluding the error) Refer to 7. STANDBY CAUSE FUNC-
TIONS.
14 ERROR STANDBY CAUSE 0 0 0 0 Error standby cause. Refer to 7. STANDBY CAUSE FUNC-
TIONS.
2/21
1 INDUSTRY INIT Enter Initialization to factory settings execution.
2 INDUSTRY INIT (-Public) OFF Initialization to factory settings execution.
(Public mode is excluded)
3 PUBLIC MODE OFF Public mode ON/OFF setting
4 Center Acutime — Main operating hours.
5 RESET OFF Main operating hours reset.
6 Backlight Acutime — Backlight operating hours.
7 RESET OFF Backlight operating hours reset.
8 LAMP ERROR RESET OFF Lamp error reset.
9 ADJ PARAM SET Enter ADJ PARAM SET
10 VIC XPOS 0 X-coordinate setting for VIC READ
11 VIC YPOS 0 Y-coordinate setting for VIC READ
12 VIC SIGNAL TYPE MAIN Signal type setting for VIC READ
13 VIC READ OFF Picture level acquisition function
(Level appears in green on the upper right)
3/21
1 N358+TUNER ADJ Enter N358 TUNER auto adjustment execution
2 N358 ADJ Enter N358 adjustment
3 TUNER ADJ Enter TUNER auto adjustment execution
4 TUNER TEST Enter TUNER TEST
5 N358 CONTRAST A_GAIN 14 N358 contrast adjustment
6 N358 CONTRAST D_GAIN 2192 N358 contrast adjustment
7 N358 CONTRAST OFFSET 255 N358 contrast adjustment
8 TUNER CONTRAST A_GAIN 16 TUNER signal level adjustment
9 TUNER CONTRAST D_GAIN 2073 TUNER signal level adjustment
10 TUNER CONTRAST OFFSET 256 TUNER signal level adjustment
4/21
1 HDMI CEC TEST Enter HDMI CEC test
2 INSPECT USB TERM Enter Reading inspection of USB memory terminal
3 HDMI EDID WRITE Enter HDMI EDID WRITING
4 MONIDATA READ [TEMP/OPC] OFF MONITOR Temperature/OPC Acquisition tool.
5 CAUSE RESET Enter Reset of standby cause
5/21
1 COMP15K ALL ADJ Enter Component 15K picture level adjustment
2 COMP15K MAIN Y GAIN 141 Y GAIN adjustment value
3 COMP15K MAIN CB GAIN 150 Cb GAIN adjustment value
4 COMP15K MAIN CR GAIN 150 Cr GAIN adjustment value
5 COMP15K Y OFFSET 64 Y OFFSET adjustment value
6 COMP15K CB OFFSET 128 Cb OFFSET adjustment value
7 COMP15K CR OFFSET 128 Cr OFFSET adjustment value