Sharp LC-60XF3DT, Service Manual, Page: 14 / 32

LC-60XF3DT
3 – 5
6/21
1 HDTV ADJ Enter HDTV video level adjustment
2 HDTV Y GAIN 141 HDTV Y GAIN adjustment value
3 HDTV CB GAIN 150 HDTV Cb adjustment value
4 HDTV CR GAIN 150 HDTV Cr adjustment value
5 HDTV Y OFFSET 64 HDTV Y OFFSET adjustment value
6 HDTV CB OFFSET 128 HDTV Cb OFFSET adjustment value
7 HDTV CR OFFSET 128 HDTV Cr OFFSET adjustment value
7/21
1 ANALOG PC ADJ Enter DVI ANALOG video level adjustment
2 R OFFSET 64 R CUTOFF adjustment value
3 G OFFSET 64 G CUTOFF adjustment value
4 B OFFSET 64 B CUTOFF adjustment value
5 R GAIN 44 R DRIVE adjustment value
6 G GAIN 44 G DRIVE adjustment value
7 B GAIN 44 B DRIVE adjustment value
8/21
1 VCOM ADJ 0 Common bias adjustment
9/21
1 DDR2 CHECK Enter Execute DDR check
2 BA[1:0] 0x00
3 ADDR[13:0] 0x0000
4 DQ[15:0] 0x0000
5 FRC ON/OFF Enter Execute FRC ON/OFF
10/21
1 R GAIN (LO) 0 R DRIVE adjustment value
2 G GAIN (LO) 0 G DRIVE adjustment value
3 B GAIN (LO) 0 B DRIVE adjustment value
4 R GAIN (HI) 0 R DRIVE adjustment value
5 G GAIN (HI) 0 G DRIVE adjustment value
6 B GAIN (HI) 0 B DRIVE adjustment value
11/21
1 MONITOR TIME OUT ON Monitor and the main communication time-out setting
2 MONITOR MAX TEMP 60 MONITOR MAX temperature setting
3 MONITOR EEP READ/WRITE WRITE MONITOR EEPROM READ/WRITE Setting/execution
4 MONITOR EEP ADR 0x 0 MONITOR EEPROM arbitrary addressing
5 MONITOR EEP DATA 0x 0 MONITOR EEPROM arbitrary data specification
12/21
1 LCD TEST PATTERN
2 LCD TEST PATTERN 1 OFF Pattern with built-in LCD controller display
3 LCD TEST PATTERN 2 OFF
4 LCD TEST PATTERN 3 OFF
5 LCD TEST PATTERN 4 NOT SUPPORT
13/21
1 FRC-N Firmware Version xxxxx
2 FRC-N Boot Script Version xxxxx
3 FRC-N Device Version xxxxx
4 TCON FPGA1 Serial Flash Version xxxxx
5 TCON FPGA2 Serial Flash Version xxxxx
6 TCON FPGA1 Config Rom Version xxxxx
7 TCON FPGA2 Config Rom Version xxxxx
14/21
1 3D HDMI FPGA Version xxxx
2 2D
→
3D FPGA Version xxxxxxx
3 3D IR PROTOCOL FIXED 0x00
4 3D IR EMITTER CONTROL ON
Page Line Item Description Remarks (adjustment detail, etc.)