Sharp LC-60UD20E Operation Manual Download

Page: 39 / 89

Power save settings

Go to “TV Menu” > “Setup” > “ECO”.

Setup

No signal off

ECO picture control

ECO

Energy save

CH list

:Back

:Enter

No operation off

[Disable]

[Off]

[On]

ECO

ECO picture control

This function automatically detects the image
source and decreases the power consumption while
keeping the brightness of the image unchanged.

NOTE

• This function does not work when “AV mode” is set to

“DYNAMIC (Fixed)”, “DYNAMIC” or “MOVIE THX”.

• This function does not work when “Energy save” is set

to “Standard” or “Advanced”.

• This function is greyed out in 3D mode.

ECO

Energy save

This function enables you to reduce the backlight
brightness in order to decrease the power
consumption and increase the backlight life span as
shown in the following table.

Item

Standard

Reduces the backlight brightness.

Advanced

Reduces the backlight brightness more
than “Standard”.

Off

The backlight brightness is the same
value of your settings in the selected
“AV mode”.

NOTE

• This function does not work when “AV mode” is set to

“DYNAMIC (Fixed)” or “MOVIE THX”.

“Energy save” status icons

Icon

Description

“Energy save” is set to “Standard”.

“Energy save” is set to “Advanced”.

When “Energy save” is set to “Standard” or
“Advanced”, “Energy save” status icons appear
in the “Picture” menu and channel information
windows.

ECO

No signal off

When set to “Enable”, the TV will automatically
enter standby mode if there is no signal input for 15
minutes.

NOTE

• Even if a TV programme finishes, this function may not

operate because of interference from other TV stations
or other signals.

ECO

No operation off

The TV will automatically enter standby mode if no
operations are performed in three hours if “Enable”
is selected.

NOTE

• Five minutes before the TV enters standby mode, the

remaining time displays every minute.

ECO

Sleep timer

Allows you to set a time when the TV automatically
enters standby mode. You can set the time span for
entering standby mode after selecting “Change”.

NOTE

• Select “Off” to cancel the sleep timer.
• When the time has been set, countdown automatically

starts.

• Five minutes before the preset of time expires, the

remaining time displays each minute.

Basic adjustment

Summary of Contents for LC-60UD20E


























































































Search results

Summary of Contents for LC-60UD20E

Reviews:

Related manuals for LC-60UD20E

Brands by name

Popular brands

Sharp LC-60UD20E, Operation Manual

Search results

Summary of Contents for LC-60UD20E

Reviews:

Related manuals for LC-60UD20E

Brands by name

Popular brands