Sharp LC-60LE925X, Operation Manual

Page: 50 / 96

H
Selecting “Watch” in the timer setup
screen
This setting allows you to switch to a programme at a
set time.
1
Press
c
/
d
to select “Watch”, and then press
ENTER .
2
Press
c
/
d
to select “Yes”, and then press
ENTER .
3
Press ENTER to set time.
• The selected TV programme is marked with an icon.
48
Watching TV
Timer setting using EPG
You can select TV programmes using data from the EPG.
Press EPG .
1
Press
a
/
b
/
c
/
d
to select the programme
you want to set, and then press ENTER .
2
Press
c
/
d
to select the timer setting, and
then press ENTER .
• If you select “No”, the TV returns to the EPG
screen.
3
Cancelling the timer setting
Press EPG .
1
Press
a
/
b
/
c
/
d
to select the programme on
timer setup, and then press ENTER .
2
Press
c
/
d
to select “Cancel”, and then press
ENTER .
3
H
Cancelling using B button on the remote
control
Press EPG .
1
Press B to display the timer list screen.
2
Press
a
/
b
to select a programme you want
to change, and then press ENTER .
Press
c
/
d
to select “Cancel”, and then press
ENTER
.
4
Press
c/d
to select “Yes”, and then press
ENTER .
4
Press ENTER to cancel timer setup.
5
Press
c/d
to select “Yes”, and then press
ENTER .
5
NOTE
• When the country setting is set to “New Zealand”, this function is
not available due to the use of MHEG-5 EPG.
NOTE
• When the country setting is set to “New Zealand”, this function is
not available due to the use of MHEG-5 EPG.
Press
c
/
d
to select “Setup”.
Press MENU and the MENU screen displays.
1
2
Press
a
/
b
to select the desired time zone
and then press ENTER .
Press
a
/
b
to select “Time zone”, and then
press ENTER .
5
6
Press
b/c/d
to select “View setting”.
3
Press
a
/
b
to select “Individual setting”, and
then press ENTER .
4
NOTE
• This function lets you select the right time zone in case the time
displayed in the EPG does not match the local time of your area.
• When the country setting is set to “Australia”, this function is
available. When the country setting is set to “Singapore” or “New
Zealand”, this function is not available.
1
2
5
Press MENU and the MENU screen displays.
Press
c
/
d
to select “Setup”.
Press
a
/
b
to select “MHEG-5 (EPG)”, and
then press ENTER .
3
4
Press
b
/
c
/
d
to select “View setting”.
Press
a
/
b
to select “Individual setting”, and
then press ENTER .
6
Press
a
/
b
to select “Enable” or “Disable”,
and then press ENTER .
NOTE
• This function is only displayed for models for the New Zealand
market. This function is not displayed for models for the Singapore
or Australia market.
• When the country setting is set to “New Zealand” in the initial auto
installation, this function is available. When the country setting is set
to “Australia” or “Singapore”, this item is greyed out and cannot be
selected.
• The MHEG-5 is not displayed when there is no MHEG-5 information
on broadcast in setting this function to “Enable”.
• When this function is set to “Enable”, subtitles may not be
displayed. If this occurs, set to “Disable” and then display of
subtitles will be possible.
Selected item Description
Enable MHEG-5 is displayed during DTV mode.
Disable MHEG-5 is not displayed during DTV mode.
3
Time zone
This function enables you to select your local time zone.
MHEG-5 (EPG) setting
This function is set to enable MHEG-5 in DTV mode.
60LE925X_en_au.indd 48 60LE925X_en_au.indd 48 2010/09/01 16:32:47 2010/09/01 16:32:47