Sharp LC-50U35T, Service Manual

Page: 18 / 102

LC50/58/65U35T
5 – 10
Writing the Panel size, volume, type and destination
1) Enter the adjustment process mode
2) Point the cursor to [PANEL SIZE]
3) Select Panel Size and press [enter] key
4) “OK” is displayed
5) Point the cursor to [VOLUME TYPE]
6) Select Volume Type and press [enter] key
7) “OK” is displayed
8) Point the cursor to [INDUSTRY INITIAL]
9) Select Destination and press [enter] key
10) “OK” is displayed
Volume
Type
50U35T 58U35T 65U35T
0 1 2
10. FACTORY SETTING
AC power is plug off after shipment setting is done.
Caution: Do not plug on again after shipment setting is done. If do, please re-do the shipment setting.
E R U D E C O R P N O I T I D N O C M E T I
Factory setting AC power off to exit the
factory setting.
࣭ Move cursor to [INDUSTRY INIT] on 2
nd
page, change the option from
NO to YES, then press [ENT].
Version confirmation screen is displayed on the green screen, if
[SUCCESS] is displayed on the top side, it is complete.
࣭ Power AC OFF.
The followings are initialised to factory setting
1) User Setting
2) Channel Data (broadcast frequencies etc.)
3) Password Setting Value
4) Operating Hours
5) Standby Cause
6) Auto Installation Flag