Sharp LC-42SV32B, Service Manual

Page: 8 / 108

LC-42SV32B
8
Loosen the 4 screws that secure the stand neck by using a cross-head screwdriver.Remove the stand cover from the TV set.
Note
• To attach the stand neck, perform the steps in reverse order.
• Do not over tighten the screws and install the TV set without the stand cover.
• At the time of purchasing wall bracket, please check if there is enough space between the wall bracket and TV terminals for the terminal connection.
Wall Mounting
TV screen size (Inches)
VESA-compatible wall bracket
(millimeters) (W x H)
Screw type
42" 400 x 200 mm Metric 6 x 10 mm
Preparation
Installing Batteries in the Remote Control Unit
1 Remove the battery compartment from the remote control.
2 Insert two "AAA" size batteries (supplied with the product).