15
Turning on the power
Press
POWER
on the TV.
• POWER indicator (Green): The TV is on. (After a few
seconds, an image appears with sound.)
• After turning the power “ON” by pressing
POWER
on the
TV, you can turn the power ON/OFF by pressing
POWER
on the remote control.
Preparation
POWER
button
Turning off the power
POWER indicator
POWER
indicator
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby
mode.
Turning the TV on/off
Press
POWER
on the remote control.
• The TV enters standby mode and the image on the screen
disappears.
• The POWER indicator on the TV changes from green to red.
Press
POWER
on the TV.
• The POWER indicator on the TV turns off.
• When the TV is turned off by
POWER
on the TV, you
cannot turn on the power by pressing
POWER
on the
remote control.
Light off
Power off
Lighted (Red)
The TV is in standby mode.
Lighted (Green)
The TV is on.
POWER
button
LC-42G77H/LC-46G77H/LC-52G77H
Press
POWER
on the TV.
• The initial auto installation wizard appears.
1
Setting the on-screen display language.
2
Press
a
/
b
to select the desired language, and
then press
ENTER
.
3
Initial auto installation
When the TV powers on for the fi rst time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
Confi rm the following before turning on the power.
• Is the antenna cable connected?
• Is the AC cord plugged in?
English
NOTE
• If you press
RETURN
in step 2, the initial auto installation
wizard does not appear. The auto installation function
allows you to execute the installation again from the “Setup”
menu. (See page 19.)
Selecting the location of the TV.
4
STORE
HOME
Press
c
/
d
to select where you will use this
TV, and then press
ENTER
.
• HOME: “STANDARD” will be the default value for
the “AV Mode” setting.
• STORE: “DYNAMIC (FIXED)” will be the default
value for the “AV Mode” setting. If the “AV Mode”
is changed, the TV will automatically switch back
to “DYNAMIC (FIXED)” when there is no signal
input from the TV or remote control unit for 30
minutes.
• Auto installation will be executed.
• You do not need to do anything during the auto
search.
Side
Front
42G77H_en_c.indd 15
42G77H_en_c.indd 15
2009/04/30 11:11:37
2009/04/30 11:11:37
