11
Using external equipment
NOTE
• The cables marked with * are commercially available items.
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 34 for a list of PC signals compatible with the
TV.
• Macintosh adaptor may be required for use for some
Macintosh computers.
• When connecting to a PC, the correct input signal type is
automatically detected.
This TV incorporates four typical AV Link functions
for smooth connections between the TV and other
audiovisual equipment.
One Touch Play
While the TV is in standby mode, it automatically turns
on and plays back the image from the audiovisual
source (e.g. VCR, DVD).
TV Standby
When the TV enters standby mode, the connected
audiovisual equipment (e.g. VCR, DVD) enters standby
mode as well.
WYSIWYR (What You See Is What You
Record)
When the remote control unit of the connected VCR
has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.
Preset Download
Automatically transfers the channel preset information
from the tuner on the TV to the one on the connected
audiovisual equipment (e.g. VCR) via the EXT 2
terminal.
NOTE
• Refer to operation manuals of each external equipment for
the details.
• Only works when the audiovisual equipment is connected
to the EXT 2 terminal on the TV with AV Link via a fully
wired SCART.
• The use of the AV Link function is only possible if the TV-
set has enforced a complete auto-installation with the
connected audiovisual equipment (Page 8, initial auto
installation).
The availability of the AV Link function depends on
the audiovisual equipment used. Depending on the
manufacturer and type of equipment used, it is possible
that the described functions may be completely or partially
unusable.
Using AV Link function
Connecting a PC
Use the EXT 4 terminals to connect a PC.
PC
ø 3.5 mm stereo minijack cable*
RGB cable*
PC
RGB/DVI conversion cable*
ø 3.5 mm stereo minijack cable*
EXT 4
EXT 4
Connecting a decoder
You can use the EXT 1 terminal when connecting a
decoder and other audiovisual equipment.
NOTE
• If the above is your connection, make sure to select
“EXT 1” under the menu item “Decoder” when you run
the Initial auto installation (Analogue) (Page 8) or when
changing the setting later (Page 15).
Decoder
EXT 1
SCART cable*
LC-42XD1E_gb_a.indd 11
LC-42XD1E_gb_a.indd 11
2006/10/27 10:21:39
2006/10/27 10:21:39
Downloaded From TV-Manual.com Manuals
