Sharp LC-37DB5U Operation Manual Download Page 14

Page: 14 / 56

Watching TV

Simple operations for watching a TV program

POWER

Turning on the power

POWER indicator

Press

POWER

on the TV, or

TV POWER

on the remote control.

• POWER indicator (Green): The TV is on. (After a few seconds, a window

appears with sound.)

NOTE

• The initial setup starts when the TV powers on for the first time. If the TV

has been turned on before, the EZ Setup will not be invoked. See page
20 for performing EZ Setup from the Setup menu.

Turning off the power

Press

POWER

on the TV, or

TV POWER

on the remote control.

• The TV enters standby mode and the image on the screen disappears.
• The POWER indicator on the TV gradually turns off.

NOTE

• If you are not going to use this TV for a long period of time, be sure to

remove the AC cord from the power outlet.

• Weak electric power is still consumed even when

POWER

is turned off.

TV POWER

(On/Standby)

• See page 23 for details.

“Off” is selected in OPC setting

“On” or “On: Display” is selected in OPC setting

TV status indicator (POWER)

Lights off

Lighting (Green)

OFF/Standby

Lighting (Green)

Lights off

TV status indicator (OPC/DL)

LC-37DB5U(E)-14-18

05.8.1, 0:35 PM

Summary of Contents for LC-37DB5U

























































Search results

Summary of Contents for LC-37DB5U

Reviews:

Related manuals for LC-37DB5U

Brands by name

Popular brands

Sharp LC-37DB5U, Operation Manual

Search results

Summary of Contents for LC-37DB5U

Reviews:

Related manuals for LC-37DB5U

Brands by name

Popular brands