Sharp LC-32SV21L, Service Manual

Page: 8 / 101

LC-32SV21L&LC-42SV31L
8
Loosen the 4 screws that secure the stand neck by using a cross-head screwdriver.Remove the stand cover from the TV set.
Note
• To attach the stand neck, perform the steps in reverse order.
• Do not over tighten the screws and install the TV set without the stand cover.
Wall Mounting
TV screen size (Inches)
VESA-compatible wall bracket
(millimeters) (W x H)
Screw type
32" 200 x 200 mm Metric 6 x 10 mm
42" 400 x 200 mm Metric 6 x 10 mm
Note
• At the time of purchasing wall bracket, please check if there is enough space between the wall bracket and TV terminals for the terminal connection
Preparation
Installing Batteries in the Remote Control Unit
1 Remove the battery compartment from the remote control.
2 Insert two "AAA" size batteries (supplied with the product).
• Place the batteries with their terminals corresponding to the (+) and (-) indications in the battery compartment.
Cautuion
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage of old batteries.