25
LC-26GA5E
LC-32GA5E
LC-32GA8/LC-32BV8
LC-37GA8/LC-37BV8
2. Send the command “DWMD” to enter TV set in Download Mode. The TV set answer sending same symbol con-
tinuosly. If this symbol character doesn’t appear, please don’t worry and pass to next step.
3. Close this connection and open “P55_115200bps” connection clicking over the “P55_115200bps” that you can find
in “START\All programs\Accessories\ Communications\HyperTerminal\HyperTerminal” folder.
4. Using “Transfer\Send file…” menu, select desired file (.bin format) and the transmission protocol (Xmodem) as
show below.
5. After press “Send” button the updating process starts as follows:
6. When flash update process finishes, the “Flash Programming Complete” label appears in the screen.
VERY IMPORTANT NOTE:
During the updating time, please don’t use the PC for other purpouses, in order to abolish communication
problems between TV set and PC. If TV set was not updated properly, the TV won’t have the software to startup
again, and you must follow the “I2C method” to update another time the TV set.
2. Send the command “DWMD” to enter TV set in Download Mode. The TV set answer
sending same symbol continuosly. If this symbol character doesn’t appear, please don’t
worry and pass to next step.
3. Close this connection and open “P55_115200bps” connection clicking over the
“P55_115200bps” that you can find in “START\All programs\Accessories\
Communications\HyperTerminal\HyperTerminal” folder.
4. Using “Transfer\Send file…” menu, select desired file (.bin format) and the transmission
protocol (Xmodem) as show below.
5. After press “Send” button the updating process starts as follows:
6. When flash update process finishes, the “Flash Programming Complete” label appears
in the screen.
VERY IMPORTANT NOTE:
During the updating time, please
don’t use
the PC for other purpouses, in order to abolish
communication problems between TV set and PC. If TV set was not updated properly, the TV
won’t have the software to startup again, and you must follow the
“I2C method”
to update
another time the TV set.
2. Send the command “DWMD” to enter TV set in Download Mode. The TV set answer
sending same symbol continuosly. If this symbol character doesn’t appear, please don’t
worry and pass to next step.
3. Close this connection and open “P55_115200bps” connection clicking over the
“P55_115200bps” that you can find in “START\All programs\Accessories\
Communications\HyperTerminal\HyperTerminal” folder.
4. Using “Transfer\Send file…” menu, select desired file (.bin format) and the transmission
protocol (Xmodem) as show below.
5. After press “Send” button the updating process starts as follows:
6. When flash update process finishes, the “Flash Programming Complete” label appears
in the screen.
VERY IMPORTANT NOTE:
During the updating time, please
don’t use
the PC for other purpouses, in order to abolish
communication problems between TV set and PC. If TV set was not updated properly, the TV
won’t have the software to startup again, and you must follow the
“I2C method”
to update
another time the TV set.
2. Send the command “DWMD” to enter TV set in Download Mode. The TV set answer
sending same symbol continuosly. If this symbol character doesn’t appear, please don’t
worry and pass to next step.
3. Close this connection and open “P55_115200bps” connection clicking over the
“P55_115200bps” that you can find in “START\All programs\Accessories\
Communications\HyperTerminal\HyperTerminal” folder.
4. Using “Transfer\Send file…” menu, select desired file (.bin format) and the transmission
protocol (Xmodem) as show below.
5. After press “Send” button the updating process starts as follows:
6. When flash update process finishes, the “Flash Programming Complete” label appears
in the screen.
VERY IMPORTANT NOTE:
During the updating time, please
don’t use
the PC for other purpouses, in order to abolish
communication problems between TV set and PC. If TV set was not updated properly, the TV
won’t have the software to startup again, and you must follow the
“I2C method”
to update
another time the TV set.
2. Send the command “DWMD” to enter TV set in Download Mode. The TV set answer
sending same symbol continuosly. If this symbol character doesn’t appear, please don’t
worry and pass to next step.
3. Close this connection and open “P55_115200bps” connection clicking over the
“P55_115200bps” that you can find in “START\All programs\Accessories\
Communications\HyperTerminal\HyperTerminal” folder.
4. Using “Transfer\Send file…” menu, select desired file (.bin format) and the transmission
protocol (Xmodem) as show below.
5. After press “Send” button the updating process starts as follows:
6. When flash update process finishes, the “Flash Programming Complete” label appears
in the screen.
VERY IMPORTANT NOTE:
During the updating time, please
don’t use
the PC for other purpouses, in order to abolish
communication problems between TV set and PC. If TV set was not updated properly, the TV
won’t have the software to startup again, and you must follow the
“I2C method”
to update
another time the TV set.
