Sharp LC-30AD1E Operation Manual Download Page 38

Page: 38 / 100

Press

DTV MENU

to display the DTV Menu

screen.

Press

to select “System setting”, and

then press

Press the

GREEN

button to display the Setup

menu.

Banner duration

You can set the time (in seconds) to display the banner.

Press

to select “Banner duration”, and

then press

Press

to select the desired time, and

then press

Basic adjustment settings (Digital)

Guide

Setup

Preference

Service lists

System setting

Installation

Access restrictions

Languages

Time Zone

Banner duration

• Unit: seconds

Press

to turn off the info banner and the

detailed programme information.

While the info banner is displaying, press

again to display the detailed programme
information.

Info banner

You can see the info banner while you are watching a
programme.

Health & Sport

BBC ONE

14:47

Current affairs

13:30-13:45

Min. left: 0

• The banner display time will vary depending

on its setting.

NOTE

• The info banner displays each time you change the

channel.

• Some programmes do not contain any detailed

programme information.

• It may take a few moments to download the info banner

data.

LC-30AD1E(E)-d

03.10.31, 1:19 PM

Summary of Contents for LC-30AD1E





































































































Search results

Summary of Contents for LC-30AD1E

Reviews:

Related manuals for LC-30AD1E

Brands by name

Popular brands

Sharp LC-30AD1E, Operation Manual

Search results

Summary of Contents for LC-30AD1E

Reviews:

Related manuals for LC-30AD1E

Brands by name

Popular brands