Sharp LC-30AD1E Operation Manual Download Page 34

Page: 34 / 100

Basic adjustment settings (Analogue)

Sort menus

Sort

Channel positions can be sorted freely.

SAT.1

KABEL

01 SAT.1

02 KABEL

01 SAT.1

KABEL

01 KABEL

SAT.1

Press

MENU

and the MENU screen displays.

Press

to select “Setup”.

[Setup ... Programme Setup]

Setup

Option

Child Lock

Auto Installation

Programme Setup

Position

WSS

4:3 Mode

[Panorama]

Full Mode

[Mode1]

[On]

[English]

[Normal]

Language

Rotate

Press

to select “Sort”, and then press

• The channels are listed. Black ones are set

“Skip” to “Off” and blue are set “Skip” to “On”.

Press

to select “Yes”, and then press

Press

to select the channel you

want to move, and then press

Auto Search

Manual Adjust

Sort

Yes

Move it to the desired position by pressing

, and then press

Repeat the steps 6 and 7 until all desired
channels are sorted.

Press

to select “Programme Setup”,

and then press

If you already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.

• See page 84 for setting PIN.

LC-30AD1E(E)-c

03.10.31, 1:18 PM

Summary of Contents for LC-30AD1E





































































































Search results

Summary of Contents for LC-30AD1E

Reviews:

Related manuals for LC-30AD1E

Brands by name

Popular brands

Sharp LC-30AD1E, Operation Manual

Search results

Summary of Contents for LC-30AD1E

Reviews:

Related manuals for LC-30AD1E

Brands by name

Popular brands