US
14
Basic Operation
Turning on POWER
When the POWER/Standby indicator is “OFF”:
Press
MAIN POWER
on the top panel of the display.
If the power cannot be switched on by pressing
MAIN POWER
, first
press
MAIN POWER
in the “OFF” position, then while keeping
INPUT
pressed, press
MAIN POWER
again.
When the POWER/Standby indicator lights up “red”:
Press
POWER
on the remote control.
• When the power is switched on, the POWER/Standby indicator
lights up green and a mode indicator appears on the upper right
corner of the display.
CAUTION
Never pull the plug of the power cord before you switch off the power
by using the MAIN POWER button on the top panel.
Note
Unless external AV equipment is connected, the indicator “AV-1”
appears on the display.
Switching INPUT Source
Press
INPUT
and select the applicable input source.
Note
• The input source mode is skipped if the corresponding input terminal is not
connected with external equipment (except “PC”).
• If you change the AV INPUT 3/AV OUT select, you can select “AV-3”. See
page 29 for details.
POWER/Standby indicator
BRIGHTNESS
MAIN POWER
Top view
BRIGHTNESS
INPUT
COMPO-1
Indicator
(Example)
AV-1 AV-2 COMPONENT1 COMPONENT2 PC
AV-1
Indicator
(Example)
