Sharp LC-20VM2, Operation Manual

Page: 17 / 31

15
US
Adjustment
MENU
SELECT
MUTE
AV INPUT
ON/OFF
VOL
–
VOL
+
SELECT
BRIGHTNESS
UPSIDE
RIGHT/LEFT
AV2 IN/OUT
AV1 LINE
SCREEN MODE
Selected item Factory setting Setting change
[BRIGHT] Maximum brightness
[NORMAL] Normal vertical
image orientation
[NORMAL] Normal horizontal
image orientation
[IN] AV input 2 in input mode
[NORMAL] The audio signals
entering from the AUDIO L
and R terminals are output
from the left and right
speakers respectively.
[MODE 1] MODE 1 is a simple
scan conversion
mode and is suited
for still pictures.
[NORMAL] Brightness 60%
→
Suitable for viewing in well-lit areas. Saves
energy.
[DARK] Brightness 20%
→
Sufficiently bright when viewing in dim areas.
[DOWN] Inverted image
→
To display images upside down for
special uses.
[MIRROR] Mirror image
→
To display mirror images for
special uses.
[OUT] AV input 2 changes to AV output mode
→
Video/audio signals entering
AV input 1 is output from AV output 2 terminals to allow recording.
* Setting change possible only for AV INPUT 2
[MONO] Only the audio signals entering from the AUDIO L terminal are output
from the left and right speakers.
[MODE 2] MODE 2 is a calculated scan conversion mode and is suited for
normal pictures.
* The scan conversion modes work in PAL and SECAM.
ABC
ABC
MENU
PICTURE
SOUND
PRESET
MENU
PICTURE
SOUND
PRESET
PRESET
BRIGHTNESS [BRIGHT]
UPSIDE [NORMAL]
RIGHT/LEFT [NORMAL]
AV2 IN/OUT [IN ]
AV1 LINE [NORMAL]
SCREEN MODE [MODE 1]
SELECT:
ENTER :
( )
EXIT: MENU
•
•
Adjusting the PRESET settings
■
The preset items can be set by the user.
1
Press MENU to display the Menu
screen.
2
Press SELECT to move the cursor
to PRESET.
3
Press VOL (+)/(–) to display the
PRESET screen.
4
Check the factory setting of each item on the PRESET screen.
The user can change the settings by using SELECT and VOL (+)/
(–) buttons.
Note
• The Menu screen and the screen selected on the Menu screen remains on the display for 30 seconds. If no
button is pressed during the 30 seconds, the display returns to the initial screen.
• The signal input from the S-VIDEO input terminal is not output from the AV OUT terminal for monitoring.
5
After changing PRESET items, press MENU to exit from the Menu screen and return to the initial
screen.