Sharp LC-19LS410UT, Service Manual

Page: 7 / 115

2008-03-14
LC-19LS410UT, LC-22LS510UT
7
QUICK REFERENCE
Attaching/Detaching the Stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from
Being damaged.
CAUTION:
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1.
Put the TV face down on a safe surface
that is covered by a soft and smooth cloth.
2.
Adjust the TV stand to the bottom of the TV.
3.
Fasten the screws by using a cross-head screwdriver(Not supplied).
CAUTION:
• Do not push to hard or put excessive pressure to the stand neck to avoid the damages when you turn the TV for the most comfortable viewing
angle.
NOTE:
To detach the TV stand, perform the steps in reverse order.
Detaching the stand neck for wall mounting
CAUTION:
• Please use care when disassembling cabinet, stand, and pillar for wall mounting.
• Detach the stand neck in the correct direction.
• Do not remove the stand neck from the TV unless using an optional wall mount bracket to mount it.
1. Loosen the 4 screws that secure the stand neck by using a cross-head screwdriver. Remove stand cover from the TV set.
NOTE:
• To attach the stand neck, perform the steps in reverse order.
• Do not force or overtighten and do not install without stand covers.
Quick Installation Tips
1. Attach your antenna to the back of the television
2. Connect the AC plug for the television into the AC outlet.
• Place the TV close to the AC outlet, and keep the power plug within reach.
• This product must only be connected to a 120V, 60Hz.