Sharp LC-19A35H-BK Operation Manual Download Page 13

Page: 13 / 48

Turning on the power

Press

POWER

on the TV.

• POWER indicator (Green): The TV is on. (After a few

seconds, an image appears with sound.)

• After turning the power “ON” by pressing

POWER

on the

TV, you can turn the power ON/OFF by pressing

POWER

on the remote control.

Preparation

POWER

button

POWER

button

Turning off the power

POWER indicator

POWER

indicator

NOTE

• If you are not going to use this TV for a long period of time,

be sure to remove the AC cord from the AC outlet.

• Minor power is consumed when the unit is in standby

mode.

Turning the TV on/off

Press

POWER

on the remote control.

• The TV enters standby mode and the image on the screen

disappears.

• The POWER indicator on the TV changes from green to

red.

Press

POWER

on the TV.

• The POWER indicator on the TV turns off.
• When the TV is turned off by

POWER

on the TV, you

cannot turn on the power by pressing

POWER

on the

remote control.

Light off

Power off

Lighted (Red)

The TV is in standby mode.

Lighted (Green)

The TV is on.

19A35H_en_c.indd 13

6/11/2008 8:00:35 PM

Summary of Contents for LC-19A35H-BK

















































Search results

Summary of Contents for LC-19A35H-BK

Reviews:

Related manuals for LC-19A35H-BK

Brands by name

Popular brands

Sharp LC-19A35H-BK, Operation Manual

Search results

Summary of Contents for LC-19A35H-BK

Reviews:

Related manuals for LC-19A35H-BK

Brands by name

Popular brands