31
[3] ACTIVATE ON TO TURN ON V-CHIP BLOCK
Adjusting the V-CHIP Settings (Continued)
1
Press MENU to display the MENU screen.
2
Press CH (
]
)/(
[
) to move the “
>
” mark to V-CHIP BLOCK.
3
INPUT SECRET NO. will be displayed. Enter the 4-digit SECRET
No. using the chanel select key. (Secret No. is not indicated on
the display.)
4
Press MENU and SECRET No. is registered.
1
“V-CHIP HAS BEEN ACTIVATED” will be displayed if you watch
the program with Program Rating data as same as you
configured.
[4] TO CANCEL THE V-CHIP BLOCK SCREEN WHILE V-CHIP BLOCK HAS BEEN
ACTIVATED.
Note:
■
“V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured
to “ON”.
2
Press MENU, then “INPUT SECRET No.” will be displayed.
3
Enter the 4-digit SECRET No. using the chanel select key, then V-
CHIP BLOCK temporarily will be canceled. If the wrong SECRET
No. is chosen, “SECRET No. IS INCORRECT” will be displayed.
Input the SECRET No. again in this case.
■
If you change Power from OFF to ON, then V-CHIP BLOCK will be activated ON again.
Also, if you select V-CHIP BLOCK using MENU again, V-CHIP BLOCK will be turned ON again.
Note:
0 1 2 3
ADJUSTMENT (Continued)
LC-12A2U-GBpp18-40
00.11.8, 9:07 AM
31
