14
BASIC OPERATION (Continued)
Control section of main unit
1
Slide the
MAIN POWER
switch,
located on the rear side of the main
unit to ON.
2
The Power indicator instantane-
ously changes from red to green
and the main unit is turned on.
▼
On-screen display
Turning on POWER
Notes:
Switching TV/VIDEO AV1/AV2/TV Mode
Note:
■
Input mode indication disappears after
several seconds.
AV1 mode
AV2 mode
TV mode
1
Turn on the power of the con-
nected video equipment.
2
Press
TV/VIDEO
and select the
applicable input source. The screen
displays AV1, AV2 or TV mode at
the upper right corner each time
TV/VIDEO
is pressed.
■
AV input mode indication remains for
5 seconds.
• AV1: Video equipment connected to the
AV1 input terminals.
An S-video input terminal is
additionally provided for the AV1
input. If both the S-video terminal
and normal video terminals are
connected with cables, the S-
video input terminal takes priority.
The display of the AV1 mode
indicates AV1 or COMPONENT
with the adjustment of PRESET
setting.
• AV2: AV2 mode is used to adjust to
preset setting and can select IN or
OUT mode. AV2 indication does
not display when the mode is
selected to OUT. (For details on
setting AV-OUT mode, see
page 22.)
Note:
POWER
TV/VIDEO
CH
CH
8
9
0
DISPLAY
LCDTV
1
2
3
4
5
6
7
MENU
FLASHBACK
MUTE
POWER
TV/VIDEO
MAIN
POWER
Power/Standby indicator
LC-12A2U-GBpp01-17
00.11.8, 9:03 AM
14
