Sharp LC 10A2U, Operation Manual

Page: 21 / 35

21
Selected item Press the VOL (–) . Press the VOL (+) .
PICTURE Decrease contrast Increase contrast
TINT/WHITE BALANCE Toward purple Toward green
COLOR Lower color intensity Higher color intensity
BLACK LEVEL Less bright More bright
SHARPNESS Soft picture Hard picture
RED-BLUE More red level More blue level
GREEN Less green level More green level
COLOR SYSTEM Press the VOL (+)/(–) to select COLOR SYSTEM.
Note:
■ TINT is displayed only when N358 or N443 is selected.
■ COLOR SYSTEM is displayed only when in the AV mode.
■ In BLUE BACK, PICTURE setting displayed in purple cannot be selected.
■ Selecting RESET will return all settings to the factory settings.
■ TV mode
This product is factory set to comply with the color system (NTSC-N358) in the United States. For Brazil (PAL-
M), Argentina (PAL-N) and Uruguay (PAL-N), set the color system before using this product.
■ COLOR SYSTEM
Set the system to AUTO for normal reception. The AUTO mode automatically detects the receiving signal
system and changes the reception system of the set.
When the picture or sound is not stable, switching to an appropriate system may improve the picture or sound
quality.
ADJUSTMENT (Continued)
Selected item Press the VOL (–) . Press the VOL (+) .
PICTURE Decrease contrast Increase contrast
TINT Toward purple Toward green
COLOR Lower color intensity Higher color intensity
BLACK LEVEL Less bright More bright
SHARPNESS Soft picture Sharp picture
COLOR SYSTEM
TV mode
AV mode
Adjusting the VIDEO ADJUST Settings (Continued)
99148_LC10A2U(18-34)Eng.pm65 00.7.23, 10:18 AM 21