EN - 13
Use of the Full Touch Control
Pyrolytic Timer
Mode Descriptions
On/Off
Key lock
Plus
Function selection
Boost
Minus
Play/Pause
Thermostat
Temperature display
Mode
Time display
Pyrolytic cleaning
The control unit will switch off after 5
minutes if no function is selected or
changed.
The appliance is operated using touch
control sensors. The functions are
controlled by touching the sensor fields.
When you are using the controls, make
sure that you touch the sensor field
correctly. If your touch is too flat or too
small the sensors will not operate correctly.
The cooling fan will switch on automatically
in order to keep the surfaces of the
appliance cool. The fan will continue to
run until it automatically switches off, even
after the oven has been switched off.
Oven Function Selection
Touch the
ON/OFF
sensor for 2 seconds
to switch the control unit on. The oven will
enter “
WAIT
” mode. During this mode, you
will be able to select the desired cooking
functions, adjust the temperature, activate
the
BOOST
function, as well as adjust the
cooking time, end time, Minute Minder
timer and the time of day.
During “
WAIT
”
mode, the desired cooking
function can be selected by touching the
P
sensor button. Each touch on the
P
sensor
will change the oven function, as shown
below (some of these cooking functions
may not be present in your cooker model):
Lamp → Defrost → Turbo → Upper and
Lower → Upper and Lower with Fan →
Grill (with/without turnspit) → Double Grill
(with/without turnspit) → Double Grill with
Fan (with/without turnspit).
The operated heaters and accessories
related to the selected function will be
displayed.
When a cooking function is selected
using the
P
sensor, the previously
selected temperature value will show
