Sharp IM-DR420H Page 57 Operation Manual Download

Page: 57 / 63

E-50

IM-DR420H

ENGLISH

03/7/21 IM-DR420H_SEEG_E.fm

IM-DR420H TINSZ0964AWZZ

Ref

rences

-E

r M

ess

A number or symbol appears in (*) position.

ERROR

MESSAGES

MEANING

NO SIGNAL

Poor connection of the digital cable.

No output signal comes out from the
connected unit.

(Use the AC power for the connected unit.)

The input signal has improper sampling
frequency.

PLAY MD

You tried to record on a playback-only
disc.

POWER?

AC adaptor other than specified.

PROTECTED

The write protection tab of a MiniDisc is
set to the protected position.

SORRY

Since a track number is currently being
located or updated, the unit cannot ac-
cept your command.

(Wait a while and try the operation again.)

ERROR

MESSAGES

MEANING

TEMP OVER

The temperature is too high.

(Turn off the power, and wait a while.)

TOC FORM
(**)

There is an error in the recording sig-
nal.

(Erase all of the tracks, and then record
again.)

TOC FULL

There is no space left for recording
character information (track names,
disc names, etc.).

Tr. Protect

The track has been protected from be-
ing erased.

(Edit the track with the device on which it
was recorded.)

? DISC

A disc which contains data other than
music was played.

(A disc which contains nonmusic data can-
not be played.)

There is an error in the signal recorded
on the disc.

Summary of Contents for IM-DR420H
































































Search results

Summary of Contents for IM-DR420H

Reviews:

Related manuals for IM-DR420H

Brands by name

Popular brands

Sharp IM-DR420H, Operation Manual

Search results

Summary of Contents for IM-DR420H

Reviews:

Related manuals for IM-DR420H

Brands by name

Popular brands