E-6
Precautions
How to use
Power Supply
INSTALLATION GUIDANCE
Precautions on installation
• When you use the product for the
fi
rst time, remove the insulation sheet.
• Operating temperature : 0°C to 40°C
(When charging : 5°C to 35°C)
• Be sure to place the product at the stable place.
• Do not block the air inlet and the air outlet.
• Do not leave in the car.
• Turn off the power on an airplane. (To avoid possibility of interferes with the safety of operation.)
• If this Plasmacluster Ion Generator cause interference to radio or television reception,
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the product and radio/TV receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Do not use items of silicone-containing products* near the unit.
* Hair care products (split end coatings, hair mousses, hair treatments, etc.), cosmetics,
antiperspirants, antistatic agents, waterproo
fi
ng sprays, polishes, glass cleaners, dustcloth, wax, etc.
• The
fl
uororesin or silicone could get stuck inside the unit, preventing it from producing
Plasmacluster ions. If this happens, remove the dust from the electrode section of the
Plasmacluster Ion Generating Unit. (See E-8)
•
Although reinforcing material (stainless steel) is used for the stand, do not apply
undue force. Otherwise, it may be broken.
•
You can charge the product by inserting an included USB cable into USB connector
of PC, however, use it after checking the speci
fi
cations of the PC. Sharp will not be
responsible for PC malfunction or data loss caused by charging.
Open the stand, install it in
a way that the air outlet is
facing the user. The stand
can be fixed in four-step
angles.
The following three power supplies are available:
設置例
< Rechargeable Battery >
< AC Adapter >
< USB >
See “Charging” on E-7.
The high-density Plasmacluster ions reach approximately 80cm point in wind blowing
direction from the air outlet.
E v e n w h e n t h e
rechargeable battery is
removed, it can be used
by connecting the AC
adapter to the outlet.
When it is connected to a PC
with the rechargeable battery
removed and left turned on,
it operates in conjunction
with ON/OFF of the PC.
Stand
Air
Outlet
Remove the
insulation sheet
IG-DM1A.EN.indd 8
IG-DM1A.EN.indd 8
2012/01/30 9:21:53
2012/01/30 9:21:53
