Sharp HT-SB600, Operation Manual

Page: 19 / 24

9
8
7
6
5
4
3
2
1
9
E-1 8
2011 January 27
HT-SB600
Note:
This product can receive FM stereo/FM monaural/AM
broadcasts.
Notes:
●
When radio interference occurs, auto scan tuning may
stop automatically at that point.
●
Auto scan tuning will skip weak signal stations.
●
To stop the auto tuning, press the TUNING button
again.
To receive an FM stereo transmission:
●
“ ” will appear when an FM broadcast is in stereo.
●
If the FM reception is weak, press the TUNER(BAND)
button to extinguish the “ST” indicator. The reception
changes to monaural, and the sound becomes clearer.
You can store 40 FM stations in memory and recall them
at the push of a button. (Preset tuning)
Note:
The backup function protects the memorized stations for a
few hours should there be a power failure or the AC power
cord become disconnected.
Press the PRESET (
or
) button for less than 0.5
seconds to select the desired station.
1. Hold the TUNER(BAND) button on the remote control
for 4 seconds or more.
2. While “CLEAR” is flashing, press the ENTER button.
1
Press the ON/STAND-BY button to turn the power
on.
2
Press the INPUT button on the main unit or
TUNER(BAND) button on the remote control
repeatedly to select the desired frequency band
(FM Stereo/FM Mono/AM).
3
Press the (TUNING or ) button to tune in to
the desired station.
Manual tunin
g :
Press the (TUNING or ) button as many times as
required to tune in to the desired station.
Auto tunin g :
When the (TUNING or ) button is pressed for
more than 0.5 seconds, scanning will start
automatically and the tuner will stop at the first
receivable broadcast station.
Listenin g to the radio
TUNING
ARC
TV
CLOCK
DIMMER TUNING TUNER(BAND)
EQUALIZER X-BA SS BA SS /TREBLE MUTE
TIMER
LINE DIGITAL
1 2
1 2 1 2
3
HDMI
Tunin g
FM S T
FM stereo mode indicator
FM stereo receiving indicator
1
Perform steps 1 - 3 in “Tunin g ” on pa g e 1 8 .
2
Press the ENTER button to enter the preset tunin g
savin g mode.
3
Within 5 seconds, press the PRESET ( or )
buttons to select the preset channel number.
Store the stations in memory, in order, starting with
preset channel 1.
4
Within 5 seconds, press the ENTER button to
store that station in memory.
If the preset number indicators disappear before the
station is memorized, repeat the operation from step
2.
5
Repeat steps 1 - 4 to set other stations, or to
chan g e a preset station.
When a new station is stored in memory, the station
previously memorized will be erased.
Listenin g to the radio (continued)
Memorizin g a station
To recall a memorized station
To erase entire preset memory