DISASSEMBLY
Caution:
Prior to the
be sure to remove the AC power
supply cord, cassette tape and batteries from the unit.
n
F R O N T C A B I N E T R E M O V A L
(Refer to Figures
and 3-2.)
1. Remove five screws
and four knobs
2. Pull the front cabinet frontward by holding its upper
part and disconnect three tips
n
M E C H A N I S M B L O C K R E M O V A L
(Refer to Figure 3-2.)
1. Remove two screws
.
2. Disconnect two sockets
.
3. Unsolder two tips
and then the mechanism block
can be removed.
Figure 3-l
q
MAIN P.W.B. REMOVAL
(Refer to Figure 3-3.)
Remove eight screws
2. Remove the LED P.W.B. from two stoppers
.
Then the main P.W.B. can be removed from the back
cabinet.
P O W E R P . W . B . R E M O V A L
(Refer to Figure 3-3.)
Remove two screws
2. Disconnect one socket@.
Figure 3-3
DIAL CORD STRINGING
Turn the drum fully clockwise and stretch its cord over
the parts in the numerical order as shown in Figure 3-4.
2) Turn the tuning control shaft fully counterclockwise, and
fix it with the pointer aligned with the zero
point on
the frame. See Figure 3-5.
Drum
Spring
Figure 3-5
Figure 3-4
