background image

ENGLISH

E-13

Date Label

FILTER REPLACEMENT GUIDELINES

Depending on the usage environment, air outlet odour may become strong
after several months.
If dust or odours cannot be removed easily, replace the filters.

(Refer to HOW SHARP AIR PURIFIER WORKS E-3)

Guide for filter replacement timing

• The following filter life and replacement period is based on the condition of smoking 10

cigarettes per day and the dust collection/deodorization  power is reduced by half compared
with that of new filters.
We  recommend to replace the filters more frequently if the product is used in a condition
significantly severer than normal household use.

• HEPA Filter                         About 5 years after opening
• Active Carbon Filter            About 5 years after opening

REPLACING THE FILTERS

1

See page E-6,7 for directions on how
to install the filters when replacing.

2

After replacing the filters:

Be sure to press the Filter Reset Button on the

Remote Control with the power cord connected to the
outlet.

A short beep will be heard and the operation hours

stored in the memory will be reset.
The Filter Indicator Light will then go out automati-

cally.

3

Fill in the usage start date of the filters
on the Date Label

.

Replacement Filters

Model: FZ-P60SEF

• HEPA Filter : 1 unit
• Active Carbon Filter: 1 unit

Please consult your dealer for purchase of
replacement filters.

Disposal of Filters

Please dispose of replaced filters according to the local disposal laws and regulations.
HEPA Filter materials:

• Filter: Polypropylene
• Frame: Polyester

• Microbial Control Filter: Polypropylene, Polyethylene

Active Carbon Filter Materials:

• Deodorizer: Activated charcoal

• Net: Polypropylene 60%, Polyester 40%

Summary of Contents for FU-P60S





































Reviews: