E-3
• Do not modify the unit. Also, no one other than an authorized repairman
should take apart or repair the unit. (Doing so could lead to fire, electric
shock or injury.) Contact your store of purchase or SHARP authorized
service center for repairs.
• Do not spill beverages or drop cigarette ashes, metal objects,easily
burnable objects, etc., into the unit through the air outlet or air intake.
Be particularly careful if there are small children in your family.
If water or foreign substances should get inside the unit,unplug the car
adapter from the accessory socket.
(Continued usage could lead to fire or electric shock.) Contact your store
of purchase or SHARP authorized service center.
• Do not wipe the unit with oils, alcohol, benzene or thinners, or spray
hairspray or insecticides on the unit. If such substances should get on
the unit, wipe them off immediately.(Such substances could lead to
cracking or electric shock or could catch fire.)
•
Do not place the unit in a place where it is exposed to oil smoke or
moisture such as kitchen counter or humidifying device.
(Doing so could lead to electric shock.)
Do not place the unit near heating equipment such as the utlet of hot-air
type heater. (Doing so could cause warping or malfunction.)
•
Use the car adapter designed exclusively for this unit, and insert the car
adapter securely all the way in until it stops.
(If the car adapter is not inserted securely until it stops, it could heat up,
deforming the accessory socket, and this could lead to fire.)
•
If the fuse should blow, be sure to replace it with a 2.5A glass tube fuse
(commercially available). Never use a piece of wire, etc., in place of the
fuse.(Using anything other than the specified type of fuse could cause
heating, leading to fire.)
• Wire in such a way that the cord does not get in the way of the driver.
Correctly attached wires according to the instructions in the Operation Manual.
(Incorrect wiring can cause injury or malfunction.)
•
If you notice abnormal operation (mold odor, unusual noise, etc.) during operation,
stop operation and remove the car adapter from the socket,
(as a precaution against fire, electric shock, or injury.)
• Be sure to unplug the car adapter from the accessory socket whencleaning.
(Failure to do so could cause electric shock or injury.)
• Be sure to unplug the car adapter from the accessory socket when not in
use for long periods of time.
(Failure to do so could lead to electric shock or fi re caused by short-
circuiting.)
FP-JC2.indd 3
2018/06/28 11:35:16