background image

Pre-Filter

HEPA Filter

Deodorizing Filter

NOTE

The air purifier draws in room air from the air intake, passes the air through a Pre-Filter, a 

Deodorizing Filter and a HEPA Filter inside of the main unit, then discharges the air through the 

air outlet. The HEPA Filter can remove 99.97% of dust particles as small as 0.3 microns that pass 

through the filter and also helps absorb odors.

The Deodorizing Filter gradually absorbs odors as they pass through the filter.

Some odors absorbed by the filters may break down over time, resulting in additional odor. 

Depending on the usage environment, especially when the product is used in extreme environments 

(significantly more severe than normal household use), this odor may become strong in a shorter 

period than expected. If the odor persists, the filters should be replaced.

•  The air purifier is designed to remove air-suspended dust and odor, but not harmful gases (for example, carbon 

monoxide contained in cigarette smoke). If the source of the odor still exists, the air purifier may not completely 

remove the odor. 

Please read before operating your new Air Purifier

OM_FP-J40E_40L_EN.indd   2

2018/06/25   11:42:53

Summary of Contents for FP-J40E















Reviews: