E-8
CARE AND MAINTENANCE
Gently remove dust from the back panel, using a vacuum
cleaner attachment or similar tool.
BACK PANEL
(Pre-
fi
lter)
To maintain optimum performance of this air puri
fi
er, please clean the unit including the
fi
lter
periodically.
Be sure to disconnect the power cord from the wall outlet before performing any maintenance.
Back Panel
CAUTION
SENSOR
1. Remove the Back Panel.
2. Remove the Dust Sensor Filter.
3. If it is very dirty, wash it with water and dry it
thoroughly.
Back Panel
Do not apply excessive pressure, when scrubbing
the back panel.
NOTE
How to clean hard to remove dirt
1. Add a small amount of kitchen detergent to water and soak
for about 10 minutes.
2. Rinse off the kitchen detergent with clean water.
3. Completely dry the
fi
lter in a well-ventilated area.
FILTERS
Tag
HEPA Filter
Deodorizing Filter
CAUTION
Gently remove dust from HEPA Filter and Deodorizing Filter with a
vacuum cleaner attachment or similar tool.
Do not WASH in water and DRY in the sun.
The
fi
lters are fragile, be careful not to apply too much force.
• HEPA Filter
Apply the maintenance only on the side with the tag.
Do not clean the opposite side; otherwise, the
fi
lter will be
damaged.
• Deodorizing Filter
The maintenance can be applied to the both sides.
Dust sensor
fi
lter
OM_FP-G50E_50L_EN.indd Sec1:8
OM_FP-G50E_50L_EN.indd Sec1:8
9/9/2559 BE 14:37
9/9/2559 BE 14:37
