
E-8
Gently remove dust from the back panel
by using a vacuum cleaner attachment or
similar tool.
BACK PANEL
(Pre-filter)
To maintain optimum performance of this air purifier, please clean the unit including the filter
periodically.
Be sure to disconnect the power cord from the wall outlet before performing any maintenance.
CARE AND MAINTENANCE
Back Panel
Back Panel
UNIT
Wipe with a dry, soft cloth
For stubborn stains or dirt, use a soft cloth
dampened with warm water.
•
Do not use volatile fluids
Benzene, paint thinner, polishing powder, etc. , may damage the surface.
•
Do not use detergents
Detergent ingredients may damage the unit.
CAUTION
1. Add a small amount of kitchen detergent to
water and soak for about 10 minutes.
2. Rinse off the kitchen detergent with clean
water.
3. Completely dry the filter in a well-ventilated
area.
How to clean stubborn dirt
NOTE
Do not apply excessive pressure when
scrubbing the back panel.
CAUTION
Gently remove dust from the HEPA FILTER with a vacuum
cleaner attachment or similar tool.
HEPA FILTER
CAUTION
• Do not WASH in water and DRY in the sun.
• Apply the maintenance only on the side with the tag.
Do not clean the opposite side; otherwise, the filter will be
damaged.
The filter is fragile, be careful not to apply too much force.
Tag
OM_FP-F30A_EN.indd 8
2015/10/14 10:53:06