Sharp FO-B1600 Page 24 Operation Manual Download

Page: 24 / 114

Connecting the Telephone Line Cord

Connecting the Telephone Line Cord

Insert one end of the telephone line cord into the adaptor. Insert the other end
of the line cord into the socket on the back of the machine marked

TEL. LINE

Plug the adaptor into the telephone socket on the wall.

Setting the dial mode

The fax machine is set for tone dialling. If you are on a pulse dial line, you
must set the fax machine for pulse dialling. Press the panel keys as follows:

Press

once and

3 times.

Press

once and

4 times.

Press

once.

Select the dial mode:

TONE:

PULSE:

Press

exit.

FUNCTION

STOP

Display:

The display briefly shows
your selection, then:

OPTION SETTING

DIAL MODE

PSEUDO RING

1=TONE, 2=PULSE

TEL.LINE

L.SET

For Australia

Note:

To use the machine in New Zealand,

please purchase a New Zealand wall jack
adaptor.

Note:

For all units installed in New Zealand, select "1" for tone dialling. The pulse

setting "2" will not operate correctly and must not be used.

all.book

Page 22

Thursday, March 6, 2003

3:57 PM

Summary of Contents for FO-B1600



















































































































Search results

Summary of Contents for FO-B1600

Reviews:

Related manuals for FO-B1600

Brands by name

Popular brands

Sharp FO-B1600, Operation Manual

Search results

Summary of Contents for FO-B1600

Reviews:

Related manuals for FO-B1600

Brands by name

Popular brands